Understanding how BayWa r.e. categorizes our USA manufactured products

Assembled in USA

The broadest category for any products with country of origin as USA
Labeling of the product must comply with Federal Trade Commission (FTC) rules and enforcement policy
Express Claims may include: “Made in USA,” “Our products are American-made,” “USA,” “Manufactured in USA,” or “Built in USA.”
Intended to represent products that are “all or virtually all” made in the USA
Room for qualified exceptions, but could be deceptive in practice and thus hard to guarantee claim is legitimate in all cases
No further documentation or authorization available from the manufacturer, other than product labelling

Build American Act (BAA) Compliant

Broadly, this product complies with any government funded project requiring a certain total percentage of domestically produced equipment be utilized
Documented via a certified letter or compliance certificate specifically identifying the US Government Act for which the product meets compliance requirements (e.g. Build America Act (BAA), Build America, Buy America (BABA) Act)
This designation is binary (compliant or not) and applies to the entire value of the finished product regardless of origin of the components
Badge indicates that documentation is available from the manufacturer for this product, and identifies the specific Act(s) for which the products domestic manufacturing (or qualified exemptions) apply

Build American, Buy America Act (BABA) Compliant

Documented via a certified letter or compliance certificate specifically identifying the US Government Act for which the product meets compliance requirements (e.g. Build America, Buy America (BABA) Act)
This designation is binary (compliant or not) and applies to the entire value of the finished product regardless of origin of the components
Badge indicates that documentation is available from the manufacturer for this product, and identifies the specific Act(s) for which the products domestic manufacturing (or qualified exemptions) apply
Requirements for BABA laws are applicable to federal financial assistance (such as grants), not procurement as is the case with BAA laws

Domestic Content Compliant

Specifically managed products with manufacturer authorized contributing domestic content component values, specifically for use under the 2022 IRA Domestic Content Commercial Tax Credit adder (ITC and PTC)
Under the current IRA Policy and guidance for this tax credit adder, a finished product must contain domestically manufactured components, and be assembled, finished, or packaged in the USA
The amount of domestic content must be determined and documented by the manufacturer under either the direct cost using the Adjusted Percentage Rule or using the Elective Safe Harbor rate tables
Compliance documentation, including the contribution rate, must be secured from the manufacturer. Reference to the specific project utilization of the procured and installed compliant equipment may also be required
Badge indicates compliance with these requirements and has been verified for this specific product and SKU name only. Alternative non-domestic content equivalent product may also be available

Disclaimer: The information provided herein is for general informational purposes only and should not be construed as tax, legal, accounting or financial advice. BayWa r.e. and its employees are not qualified in these fields and do not hold any relevant certifications or licenses. Before making any decisions related to taxes and the matters herein, please seek the assistance of a qualified advisor.

SIL-440-QD-DCA3

Name: SIL-440-QD-DCA3
SKU: SIL-440-QD-DCA3
Availability: InStock

Back

Description

Silfab 440w QD mono-PERC module; 108 half cells, black frame, black backsheet, 53.1 in, ø 0.22 in (12 AWG), MC4 from Staubli. With USA sourced frame, backsheet, and encapsulant. This item includes domestic content and if used in accordance to the provisions set forth by the IRS, may qualify the taxpayer for a Domestic Content Bonus Credit.

This product is supplied with MC4 connectors

Manufacturer Part Number: SIL440QD-DCA3

Power Output: 440 Watts

108 Cell, Monocrystalline

35mm Depth, Black Frame, Black Backsheet

1000 Volts Max Voltage

Manufacturer Warranty: 25 Years

Performance Warranty: 30 years linear, 0.5% annual degradation over 30 years

Shipping Weight: 46.3 lb

Shipping Dimensions: 67.8 x 44.6 x 1.37 in

Pallet Qty: 26

Back

Datasheet

Download SIL-440-QD-DCA3 Datasheet.pdf

Back

Installation

Download SIL-440-QD-DCA3 Install Manual.pdf

Back

Understanding how BayWa r.e. categorizes our USA manufactured products

More Details

SIL-440-QD-DCA3

Description

Datasheet

Download SIL-440-QD-DCA3 Datasheet.pdf

Installation

Download SIL-440-QD-DCA3 Install Manual.pdf

Warranty

Download SIL-440-QD-DCA3 Warranty Guide.pdf

Products

Customer Service

Information

My Account

Understanding how BayWa r.e. categorizes our USA manufactured products

More Details

Assembled in USA

Build American Act (BAA) Compliant

Build American, Buy America Act (BABA) Compliant

Domestic Content Compliant

SIL-440-QD-DCA3

Description

Datasheet

Download SIL-440-QD-DCA3 Datasheet.pdf

Installation

Download SIL-440-QD-DCA3 Install Manual.pdf

Warranty

Download SIL-440-QD-DCA3 Warranty Guide.pdf

Follow Us :

Subscribe to BayWa r.e.’s Newsletter for Regular Solar Product Updates